4568f9abbfc07acadc16b8ad8658d14b7173deaf
6
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jcoffey-dev
|
4568f9abbf |
Capture the pre-migration snapshot from 0.15.x, and stop claiming counts match when none were compared
Found by running preflight against a real Stalwart 0.15.5 in a VM. Two defects, the second worse than the first. 1. AccountSnapshot could not read the version this tool migrates FROM. 0.15.5 advertises no urn:stalwart:jmap capability and POST /api returns 404 - the JMAP management API and x:Account are 0.16 features. 0.15.x exposes a REST API at GET /api/principal instead. So preflight's account-snapshot check warned and moved on, and every run against a real source instance had no "before" data at all. AccountSnapshot now dispatches on the capability the session document advertises - a positive signal, not an inference from a failed call - and internal/stalwartapi/principal.go implements the 0.15.x REST path, including its 1-based page/limit pagination so an install larger than one page isn't silently truncated. 2. With no "before" counts, the content-integrity comparison iterated an empty map, checked nothing, and reported "all message counts match". That is the strongest claim this tool makes - ARCHITECTURE 4.7 calls it the actual no-data-loss guarantee - made vacuously, and it would have passed on a migration that lost every message. The comparison now derives its account set from whatever the source could report, verifies every account and domain survived either way, and carries MessageCountsCompared so the report says plainly "MESSAGE COUNTS NOT COMPARED ... no-data-loss is NOT verified here" rather than implying otherwise. What can and cannot be checked across the 0.15/0.16 boundary, now that a real server has answered: 0.15.x has no per-mailbox message count at any endpoint, and the impersonation login 0.16 offers returns 401 there, so before/after message counts are impossible for the boundary migration this tool exists for. Both versions do report per-account used quota (usedQuota in 0.15's REST list, usedDiskQuota on 0.16's x:Account), so that is captured on both sides. It is recorded and reported, not asserted on: 4.5 notes the 0.16 migration resets quotas to zero pending recalculation, so comparing those bytes across the boundary would be a false alarm generator. Test servers across preflight, validate and stalwartapi now advertise urn:stalwart:jmap, since they stand in for 0.16 instances and that capability is what says so. Verified end to end against the smoke VM: all nine preflight checks pass, and the checkpoint records 2 accounts, 1 domain and per-account used quota where it previously recorded nothing. |
||
|
jcoffey-dev
|
4b0bec8956 |
Add SPDX headers to every Go file
GPLv3's "How to Apply These Terms" asks for a notice in each source file; this is the modern two-line SPDX form of it rather than the full paragraph. 82 files, including tests. The blank line after the header is load-bearing. In Go a comment block immediately preceding `package X` becomes the package doc comment, so without the separator the SPDX lines would be absorbed into the doc for the eleven packages whose doc.go (or main.go) opens with one, and `go doc` would print them. Verified it doesn't. |
||
|
jcoffey-dev
|
7e04351b0f |
Add cutover; drop rollback in favour of operator-provided recovery
Two changes that arrived together: the cutover phase (ARCHITECTURE.md 4.5) is implemented, and the rollback phase is deleted. Recovery from a failed migration is now explicitly the operator's own snapshot or backup, and out of scope for this tool. internal/cutover implements 4.5 as seven checkpointed steps: verify the staged binary's version, install it, preserve and rewrite the service definition, reload, start, wait for a healthy JMAP session, recalculate quotas. The unit is rewritten in place rather than generated from a template. An operator's unit carries hardening options, limits and dependencies this tool has no business having an opinion about, and regenerating it would silently drop them. It repoints ExecStart (preserving systemd's -@:+! prefix characters and every argument after the executable), updates --config, and strips recovery-mode Environment lines - leaving STALWART_RECOVERY_MODE=1 set would recovery-boot the service on every restart, forever. It refuses on a unit with no ExecStart, and on an Environment line mixing a recovery variable with others: a line it only partly understands is one it must not edit. Quota recalculation is the one step allowed to fail without failing the phase. Its wire format is grounded in Stalwart's x:Task schema reference - Task/set creating one AccountMaintenance per account with maintenanceType recalculateQuota - but the upgrade guide only documents the WebUI path, so two details remain inferred and are called out in stalwartapi/task.go: whether the schema's "read-only" annotation on accountId/maintenanceType means "immutable after creation", and whether a finished task simply leaves the queue (TaskStatus documents Pending/Retry/Failed with no success state). Warning rather than failing is the honest response to that uncertainty, and stale counters are an accounting problem next to calling for a restore of a machine that is otherwise migrated and serving mail. Docker deployments are refused outright: cutting a container over means pulling an image and recreating it, not swapping a binary. On removing rollback. The implementation worked and was tested, and it was removed because restoring bytes correctly is not the hard part. It copied file contents and permissions and verified every restored file against a manifest - and did not preserve ownership. Run as root, as this tool requires, it would have produced a byte-perfect, checksum-verified, root-owned data directory that Stalwart, running as its own user, could not open, and it would have reported success. The PostgreSQL path was worse: pg_dump without --clean emits CREATE TABLE + COPY, which fails replaying into a database whose tables still exist, and the ON_ERROR_STOP=1 added so a half-applied restore couldn't be reported as success turned that into a hard failure. None of it had ever run against a real server. A filesystem snapshot has none of these failure modes, because it never lost the metadata to begin with. So cutover's gate is no longer rollback.CanRollBack but an explicit RecoveryPointConfirmed acknowledgement. That is an assertion, not a check - this tool cannot verify someone else's snapshot - and its only value is that nobody migrates a production mail server having never been asked the question. Two consequences are accepted deliberately: restoring any pre-migration recovery point discards mail delivered since, and a failed migration now stops and reports rather than undoing itself. What the tool still does to make a manual restore easier: the old binary is preserved and never deleted, the original service definition is preserved before the rewrite, the settings and principals dumps stay on disk, and every artifact path and checksum stays in the checkpoint where `status <run-id>` can print it. Also removed: the `confirm` command stub and RollbackWindowClosed, whose only purpose was closing a rollback window that no longer exists, and checkpoint.PhaseRollback. Old state.json files still load - JSON ignores the now-unknown field. Still open, and recorded in 8: cutover ignores systemd drop-ins, so an ExecStart or Environment override in stalwart.service.d/*.conf is invisible to the rewrite - including the recovery variable it exists to strip; nothing prevents concurrent runs on the same run-id; and nothing in this repo has ever run against a real Stalwart, real systemd, or a real store. |
||
|
jcoffey-dev
|
ade9906275 |
Implement internal/rollback and the service control it needs
Rollback was the one phase gating everything else: `run` without --dry-run refused because this tool could not undo a cutover it had committed to. That reason is now gone, and the refusal has narrowed to the fact that there is no real cutover to undo yet. internal/rollback implements ARCHITECTURE.md 4.8 as eight checkpointed steps under PhaseRollback: verify-backup, stop-service, preserve-failed-state, restore-data, restore-binary, restore-service-config, start-service, verify-rollback. Three things depart from what 4.8 specified, each for a reason: - The backup is re-verified against its manifest *before* the service is stopped, which the design didn't call out. Finding a corrupt backup is survivable while the failed instance is still up, and unsurvivable once its data directory has been moved aside. - BuildPlan is separate from Run, so every reason to refuse (closed rollback window, FoundationDB, no recorded backup, unknown deployment kind, missing database credentials) is found before anything is touched. The CLI prints that resolved plan and acts only with --yes. - The restore is re-verified against the same manifest after writing. A restore that put back truncated bytes and reported success would be worse than one that failed outright. Nothing from the failed attempt is deleted: the half-migrated data directory and the displaced binary are moved to .failed-<run-id> names, so a retry after the underlying issue is fixed still has both the evidence and the artifacts. Afterwards a reduced validation suite runs against the *restored* instance (version, reachability, directory counts) rather than assuming the restore worked. internal/service is a new package holding the systemd/Docker control this needs. It's separate rather than living inside internal/rollback because cutover will need the identical operations, and because the commands that can take mail delivery down belong in one auditable place - the same reasoning that makes stalwartapi the only thing speaking JMAP. preflight.DeploymentKind is now a type alias for service.Kind so detection and control can't drift apart. Its Active() reads `systemctl is-active`'s output rather than its exit status: systemctl exits non-zero for every non-active state, so exit-status logic would make "inactive" - the answer a rollback most needs - look like a failure to read the state at all. Also fixes a pre-existing bug in `status`: Go's flag package stops parsing at the first positional argument, so `status <run-id> --state-dir X` looked the run up in the default directory and reported it missing. `rollback` would have inherited the same footgun on a command whose flags decide what gets overwritten. Still open: `confirm` cannot set RollbackWindowClosed. Rollback honours the flag and refuses when it's set, but closing the window is the point of no return for the backups this restores from, so it should land with the retention policy 6 describes rather than before it. Verified end to end against a fake systemd deployment: half-migrated data restored to its original contents, failed state preserved, old binary reinstalled and reporting 0.15.5, unit restarted, and a re-run of the completed rollback inert. |
||
|
jcoffey-dev
|
5566eed1c8 |
Fix module path and restore cmd/ omitted by gitignore
Rename module github.com/johnellis/stalwart-migrator -> github.com/LINUXexpert-org/stalwart-migrator to match the repository location, so the module resolves under `go get`. The initial commit's .gitignore listed the compiled binary as a bare `stalwart-migrate` pattern, which Git matches at any depth -- so it also excluded the cmd/stalwart-migrate/ source directory, and the initial commit shipped without the CLI entrypoint. Anchor the pattern to the repo root as /stalwart-migrate and add the four missing files. go build, go vet, and go test ./... all pass. |
||
|
jcoffey-dev
|
719a945d64 |
Initial commit: stalwart-migrator design and scaffolding
In-place upgrade tool for Stalwart Mail Server (0.15.5 -> latest) with checkpointed rollback and post-migration validation. Design stage; see ARCHITECTURE.md. |